The JHS Pedals AT is Andy Timmons signature overdrive pedal that gives Andy his unmistakable lead and rhythm tone. Upon purchasing an Angry Charlie in 2013, Andy began using it as his primary tone and soon after got in touch with Josh Scott about modifying it for his needs. Through going back and forth and tailoring it to Andy’s tastes, the “@“ was born. This pedal gives you all the soaring overdrive and distortion that you hear from Andy with plenty of options to craft your tone with your rig. So pay ATtention and we’ll see what makes the AT rock.
The controls include Volume, EQ, Drive, Air, and a three-way toggle for 25-watt, 50-watt, or 100-watt modes. The AT Volume gives you plenty of headroom to play with, while the Drive control has a wide range from high gain blues to thunderous distortion. The tone controls work together to give you the ability to shape your tone and sit perfectly in a mix. The EQ works as a standard bright/dark tone control, while the Air control rolls in top end like a presence control so you can have just the right amount of brightness for articulation and clarity. The three-way toggle gives you the feel of different wattage amplifiers. The up position is the 25-watt setting with the most compression and saturation with the least amount of volume. The down position is the 50-watt setting for a good balance of compression and openness. The middle position is the 100-watt position for tons of volume and open crunch while being less focused.
- Andy Timmons signature overdrive sound he takes everywhere!
- Unparalleled amp-like feel.
- Tons of volume and a drive sweep with plenty of variation in tones.
- EQ and Air controls to dial in the perfect tone to cut through the mix.
- 25, 50, and 100 watt modes.
- Andy’s hair. Or not.
If you’ve ever heard Andy Timmons play and wondered how to get his tone, this is the revelATion revealed!
This pedal requires standard 9V DC Negative power, consumes less than 100mA, and measures 2.6"x4.8"x1.6"
You can safely run “The AT“ at 18 or 9 volts